Product introduction:
1.0mm low temperature hot melt adhesive Gangbao, scientific name: low temperature hot melt film; it is the most advanced front and rear lining setting hot melt film for shoes - a new type of high-quality material for shoes. Because professional, so excellent. TPU, the main component of low temperature hot melt rubber, has the high elasticity of rubber and the plasticity of thermoplastic materials; its viscosity remains unchanged after many times of use, and its products do not stick to hands after heating and softening. The characteristics of low operating temperature, suitable opening time and high bond strength. Application of low temperature hot melt adhesive Gangbao: apply hot melt film to the front and back for shaping the head and main heel, so that the appearance of shoes will not be deformed, so as to achieve aesthetic effect. It is applicable to all high-grade leather shoes, horse boots, women's shoes, children's shoes, work shoes and all kinds of sports shoes. Specifications of low temperature hot melt adhesive Gangbao: the thickness is 0.4mm ~ 1.5mm, there are three colors of coffee, white and aquamarine (light blue), and there are two specifications of roll and sheet for selection. Specification (thickness) applicable range coil (code / roll) sheet (1 code * 2 code)
0.4mm ± 0.05mm general lightweight men's shoes, women's shoes, children's shoes and casual shoes size 50
0.6mm ± 0.05mm general lightweight men's shoes, women's shoes, children's shoes and casual shoes size 50
0.8mm ± 0.05mm general lightweight men's shoes, women's shoes, children's shoes and casual shoes size 50
1.0mm ± 0.05mm light casual shoes, men's shoes, women's shoes, children's shoes and Boots Size 40
1.2mm ± 0.05mm men's shoes, women's shoes, boots, mountaineering shoes and Special Purpose Shoes Size 40
1.5mm ± 0.05mm men's shoes, women's shoes, boots, mountaineering shoes and special purpose shoes size 30

Cutting method for the use of low temperature hot melt rubber Harbor:
It can be cut according to the direction indicated by the product (i.e. horizontal direction). Edge cutting method: the traditional edge cutting machine can be used. If necessary, add lubricating oil or (spray) drips on the edge of the edge cutting machine. Molding method: the interface temperature of material fitting is 80 ~ 100 ℃; the activation temperature is 75 ~ 90 ℃. If the hot / cold type rear sleeve molding machine is used, the hot mold temperature shall be set as 105 ~ 120 ℃, and the temperature shall be kept for 15 ~ 20 seconds (the setting of temperature and time shall be adjusted according to the change of face material and inner material); if the California type last entry method is used, the temperature of the heating activation system of the side molding line shall be set as 100 ~ 105 ℃, and the temperature shall be maintained Hold for 5 minutes. Advantages of low temperature hot melt adhesive Gangbao: the finished shoes are beautiful in shape, easy to form, not easy to deform after forming, and have excellent resilience, good weather resistance and wear resistance, and green and environmental protection materials. There is no crease and water caltrop when setting, reducing the defect rate of the product has good adhesion to all kinds of materials, and no need to apply adhesive. Energy saving and excellent operation. Low temperature hot melt adhesive storage: the product is stored in a ventilated, dry and dark indoor place, with a shelf life of one year.