Hong Bao: is used in the heel to heel below to fixed effect, the materials used are a bit like cardboard that is relatively hard, just when the fixed port treasure and will use rubber shoes.
The classification of Hong Kong treasure
1 leather Po in Hong Kong
By softening due to immersion method, the Hong Kong treasure is leather in leather for Hong Kong Bao bottom material softening method is used to Handmade leather shoes, leather shoes in Italy at present, traditional thought, multi use of such does not comply with the economic benefits of the Po in Hong Kong.
2 Chemical Hong Bao
By soaking solvent (toluene) softening method; the Gangbao leaching solvent can be softened in recent years, as one of the revolutionary shoe footwear industry. The characteristics of soaking solvent can be very soft, the most conducive to the shoe molding, do not add or enhance any treatment, drying and cooling can reach the effect of stiffness, widely used for the shoe industry. The advantages of cheap, easy molding. Disadvantages: thick, forming a long time. The difference of elasticity
3 hot melt adhesive Po in Hong Kong
The heating softening method utilizing the heating (about 100 degrees - 120 degrees), so that the pre pressed in front of the position of the shoe lining "hot melt softening, advantages to the lasting molding: fast, thin, elastic than the general good. Toepuffs disadvantages: high difficulty forming, heat is not easy to master.
The other in the production of climbing shoes and safety shoes are also used iron and other special materials for Hong Kong Bao
Use Gangbao instructions
PU sponge and artificial leather insole material
1), suitable solvent toluene, acetone, dichloromethane, Ding copper can play a bridging function.
2), can be directly connected with with solvent and solvent can also brush smear, both can play the best adhesion effect
3), such as advance shall be attached to the shoe heel skin, apply adhesive can use yellow paste, evenly brush back and forth. Do not brush too thick, and the after set stick together, not easy to peel, wind bag.
4), Gangbao water: Summer: 30% toluene, 70% drying ratio
Winter 20%: 80% ratio of toluene, quick drying.
5), Hong Kong Po into the upper two waist with a brush in Hong Kong on toluene treasure to make it easy climbing shoes, not easy to wrinkle, not prone to angle. Hong Kong should brush treasure under the edge of toluene make it not easy to package after the angle characteristics
Advantages: low cost, easy to use.
Disadvantages: glue toluene and other toxic solvents and not environmental protection, the hardness is not good, wear after deformation.
The scope of the Po in Hong Kong
Children's shoes, women's shoes, men's shoes, sports shoes, skating shoes and all footwear.
Dongguan jieshimei Material Co. Ltd (also known as Italy jieshimei Moreau Industrial Co. Ltd.) was established in 1999, located in the high-end China shoe production base - Dongguan, has now developed into a large enterprise production and sales, and in Italy, Macao, Anhui set up a branch. The strength of the company, advanced equipment, focus on R & D can really help the customers to solve the problems of innovative products, and pioneered the global breathing cotton hot melt adhesive Po in Hong kong. We specialized in advanced cotton hot melt adhesive toepuffs series, advanced low temperature hot melt adhesive toepuffs series, hot melt adhesive mesh series, advanced water soluble toepuffs series, hot pressing shoe cloth series, special fabrics, accessories such as shoes with senior shoe products.
The main products : Low temperature hot melt adhesive Po in Hong Kong , Hot melt adhesive Po in Hong Kong , Cold Bao Hong Kong , Water soluble Po in Hong Kong ,Imiation leather fabric , Cold paste The hot press molding, cloth, special cloth shoes
Contact number： 086-769-85825193 / 13602351797