EVA hot melt without a solvent, water-free, 100% solids meltable polymer, which is solid at room temperature, heated and melted to flow to some extent into a viscous liquid and has an adhesive agent after melting translucent light brown or the white. 

EVA hot melt adhesive has the following characteristics: 

    1. Normally solid at room temperature and heated to a certain extent as a liquid melt, once cooled to below the melting point, and quickly becomes solid (i.e., they cure); 
    2. With a fast curing, low pollution, strong adhesion, glue has some flexibility, hardness, has a certain toughness; 
    3. After the glue is applied on the adherend cooled solidified layer, can be heated and melted, and then again into the adhesive body and the adherend to be bonded, and then has a certain viscosity; 
    4. When used, as long as the hot melt adhesive melted by heating to a desired liquid, and painting on the object to be bonded by the lamination can be completed within a few seconds the adhesive curing, hardening can be achieved within a few minutes of cooling and drying degree.